Pip

TUF-inside-USB-charger-Type-A-Type-C

Optional TUF A+C 5A
Designed for panel mounting
Wide range of colour & finish options
Integrated fixing clips/clamps
Pre-wired to mains plug or GST18

PIP, as the name suggests has been designed to provide convenient AC power and USB ‘fast-charging’ in its purest and simplest form.

PIP presents a single OE Electrics mains AC or USB charging socket (TUF) in a wide choice of decorative bezels, with style, colour and finish option to perfectly complement your interior design theme.

Designed specifically for panel mounting in furniture, PIP fits into a standard 60mm cable grommet opening and requires only 44mm depth. Integrated fixings enable quick installation in most surfaces from 0.9mm to 30mm thick, including panels with limited rear access.

PIP is supplied as a prewired unit with hardwired power cable to national mains plug or GST18 connector, ready for installation. Two or more PIP units can be interlinked to provide combinations of AC power and USB fast charging as is needed by the user.

Configuration:

The PENDULUM single socket aperture may be configured with an AC power from the OE 42mm modular range or our class leading OE TUFA+C5A:Twin USB Fast charger

Construction:

Body and back – Nylon
Socket fascia – Polycarbonate
Bezel – ABS with optional metal inlay

Integral Fixings:

Panel mount clips for surfaces 0.9mm – 3mm thick
Screw clamps for surfaces 0.9mm – 30mm thick

Colours

Socket fascias – Black, Grey or White (UK AC & TUF only)
Body and back mouldings – Black
Bezel – Black, grey or white mouldings with optional satin painted finishes and decorative inlays

Earth Bonding:

PIP units with AC power sockets can be ordered with an optional external lead for earth bonding metal furniture.

Socket Fusing:

To enable compliance to BS6396 UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A)

Power cord options:

PIP may be ordered:
Hardwired power cord to AC plug, or
Hardwired power cord to GST18-3, or
Hardwired power cord to OE J coupler

Installation:

PIP can be installed into a pre-existing industry standard ø60mm cutout, or hole can be drilled into surfaces using an appropriate hole
saw.

Quality and Testing:

All PIP units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance

“We test every pin on every connection in every socket”

CE Marking

All units built with UK and European socket types are CE marked by OE Electrics as complying with:
Electromagnetic Compatibility Directive 2014/30/EU
Low Voltage Equipment Directive 2014/35/EU
RoHS2 Directive 2011/65/EU

Certifications

PIP has been designed and is manufactured to comply with applicable national/international safety and EMC standards for the country of intended use, utilising fully certified components.

Dimensions:

Cutout Dimensions:

PIP can be installed into a pre-existing industry standard Ø60mm cutout, or hole can be drilled into surfaces using an appropriate hole saw.

Maximum Panel Thickness:

Dimensions:

Cutout Dimensions:

PIP can be installed into a pre-existing industry standard Ø60mm cutout, or hole can be drilled into surfaces using an appropriate hole saw.

Maximum Panel Thickness:

Pip Datasheet
3D file
CE Declaration
Hi-Resolution Images
Fitting Instructions

PIP is supplied as standard in white with a grey socket, but is available in a number of special paint finishes. Almost any colour can be applied* and then finished as standard satin, gloss, or ‘soft touch’.
Download the OE Colour Book here

 

*Please note colours may vary on monitors

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team. Don't worry, we only send out emails about once a month and it's always interesting stuff!

You have Successfully Subscribed!