UK designed and manufactured
Ultra compact integrated design
Mounts into standard 80mm Ø apertures
BS6396 compliant and CE marked*

PixelTUF discreetly presents both mains and 25W USB charging power in an ultra-compact form, meeting the growing need for easily accessible mobile device charging in informal areas. Perfectly suited to breakout areas, smaller meeting rooms and coffee tables, in offices, hotels, and other public spaces – installation of PixelTUF is only limited by the imagination.

PixelTUF can be specified with either UK fused or unfused sockets, plus a wide range of international power socket options. Fast USB charging of up to two mobile devices is provided via the fully integrated OE TUFA+C25W:Twin USB Fast Charger.

PixelTUF is available from stock in white or black with satin silver grommet ring and alternative decor matching ring colours to special order.

*As applicable


PixelTUF may be configured with the following AC power options from the OE 42mm modular range or our class leading OE TUFA+C25W:Twin USB Fast charger


  • UK Fused Socket
    UK Fused Socket
  • UK Unfused Socket
    UK Unfused Socket
  • Schuko (German) Socket
    Schuko (German) Socket
  • French/Belgian Socket
    French/Belgian Socket
  • Australian Socket
    Australian Socket
  • Argentinian Socket
  • Chinese Combi Socket
  • Danish Socket
    Danish Socket
  • Indian 6A socket
  • Italian Socket
    Italian Socket (10A)
  • Swiss Socket
    Swiss Socket
  • Brazilian Socket
    Brazilian Socket
  • USA Socket
  • South African Socket
  • TUF-R A+C 25W



High impact fire retardant polycarbonate enclosure.
Polycarbonate 80mm mounting grommet with hand tightened securing nut.


Fascia – satin black or satin white
Grommet ring – silver as standard or as an extra cost option alternative grommet ring colours are available
UK Socket fascia – black or white to match the pixelTUF fascia
International Socket fascia – black or grey (Nema 5-15R – black only)

Socket Fusing:

To enable compliance to BS6396  UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A). PixelTUF can also be ordered with unfused UK sockets.

Power cord options:

PixelTUF may be hardwired to:

– mains AC plug
– male Wieland GST18 connector for “soft wiring” e.g. connection to an under desk module or to a mains supply socket via a starter cable


pixelTUF fits into a standard 80mm grommet hole and is securely held in place by the large plastic locking nut which can be tightened by hand.

Quality and Testing:

All pixelTUF units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch:

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance
  • Data & AV: All sockets continuity tested with batch performance testing.

“We test every pin on every connection in every socket”

CE Marking

All units built with UK and European socket types are CE marked by OE Electrics as complying with:
– Electromagnetic Compatibility Directive 2014/30/EU
– Low Voltage Equipment Directive 2014/35/EU
– RoHS2 Directive 2011/65/EU


AC Power socket:   The fitted socket will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, UL498, CCC, AS/NZS3112
Cable, connectors & mains plug:   Independently certified to the appropriate national/international standard


Technical data

USB charging outlets 2 x type A female
Charging Current: Max  5A in total
 AC voltage range 110-240V AC 50/60Hz
AC inout current Max 0.25A at full load
Less than 0.5mA at no load
Rated total Output 25W max
Output voltage 5V DC +-5%
Standby Power use Less than 0.05W
MTBF* Min 5 years in normal use
USB connector Gold plated – min 5000 insertions
Over current protection Yes – self regulating
Short Circuit protection Yes – Auto reset
Apple ipad/iphone compatible Yes
Blackberry compatible Yes
Operating Temperature range 0° to 35°C
 Max relative humidity  85% RH

Indicative Charging times from 10% to 90%

Device Hours:Mins
Sony Xperia Z1 2:23
iPad 3 & 4 3:45
iPhone 6S 1:29
Samsung Galaxy Note 10.1″ 2:36
To fit PixelTUF into your desk couldn’t be simpler. If your desk already has an industry standard 80mm hole* simply take the fixing nut off your newly purchased PixelTUF, feed the cables through the hole and gently slide your PixelTUF into place. Make sure your PixelTUF is facing the desired orientation and screw the fixing nut back on until it is firmly in place. PixelTUF will fit any surface from 1mm to 40mm.


? Click image to zoom & choose download options

PixelTUF is supplied as standard in black with a silver bezel ring, but the bezel ring is available in a number of special paint finishes. Almost any colour can be applied* and then finished as standard satin, gloss, or ‘soft touch’.

  *Please note colours may vary on monitors

Pin It on Pinterest

Share This