Designed for panel mounting
Supplied pre-wired
Suitable for many different environments
CE marked as applicable

PROTON, as the name suggests, has been designed to provide AC power or USB fast charging in its simplest form. Designed for panel mounting in furniture, PROTON presents a single or double outlet module in a stylish matt silver, matt black, gloss black* or chrome decorative bezel. PROTON is supplied as a prewired unit with power cable to a national mains plug or Wieland connector, ready for installation†.

PROTON can be configured to provide combinations of AC power, OE TUFA+C25W:Twin USB Fast charger and/or data as needed by the user.

All OE Electrics’ products are manufactured to enable compliance with BS6396/BS7671† where relevant.

†PROTON must be fully installed, as per the manufacturer’s instructions, in order to achieve complete compliance with BS5733 or IEC60884-1.
Installation must be completed before PROTON is connected to the supply

*Single version only



PROTON single or twin apertures may be configured with the following AC power options from the OE 42mm modular range or our class leading OE TUFA+C25W:Twin USB Fast charger

Power:  UK*, European and International power sockets,  and/or OE TUFA+C25W:Twin USB Fast charger * UK fused sockets can only be fitted in a 2 gang Proton.


Moulded ABS/Polycarbonate, socket fascias, back box and trim bezel


Bezel – matt silver, chrome, matt black or gloss black*
Socket fascia – black
Cable – black

*single frame only

Socket Fusing:

To enable compliance to BS6396 UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A)

Power cord options:

PROTON may be  hardwired to: – mains AC plug, – Male Wieland GST18 connector for “soft wiring” e.g. connection to an under-desk power modules or direct to a floor socket via a starter cable.


Front mounted to vertical surface via the integral clips for 16mm panels or four screw fixing points beneath the snap on trim bezel.

Quality and Testing:

All PROTON units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch.

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance
  • Data & AV: All sockets continuity tested with batch performance testing.

“We test every pin on every connection in every socket”

CE Marking

All units built with UK and European socket types are CE marked by OE Electrics as complying with:

  • Electromagnetic Compatibility Directive 2014/30/EU
  • Low Voltage Equipment Directive 2014/35/EU
  • RoHS2 Directive 2011/65/EU


AC power socket: The fitted sockets will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, CCC, AS/NZS3112. OE TUF 25W: Independently certified to IEC/UL 62368-1. Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.

Unit Dimensions

unit-dimensions Cutout Dimensions cutout-dimensions Mounting Details mounting-details Cable Outlet Positions cable-outlet-positions



Single Gang Cutout

Double Gang Cutout


PROTON must be fully installed, as per manufacturer’s instructions, in order to achieve complete compliance with BS5733 or IEC60884-1. Installation must be completed before PROTON is connected to the supply.

Pin It on Pinterest

Share This

Download the PDF​

* indicates required

Please select all the ways you would like to hear from oe electrics Inc:

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp’s privacy practices here.