Pip

TUF-inside-USB-charger-Type-A-Type-C

Black pip with stainless steel inlay with black schuko socket
Pip in yellow with TUF5A charger in blue lockers
Download Data Sheet
Enquire

Optional TUF A+C 25W
Designed for panel mounting
Wide range of colour & finish options
Integrated fixing clips/clamps
Pre-wired to mains plug or GST18

PIP, as the name suggests has been designed to provide convenient AC power and USB ‘fast-charging’ in its purest and simplest form.

PIP presents a single OE Electrics mains AC or USB charging socket (TUF) in a wide choice of decorative bezels, with style, colour and finish option to perfectly complement your interior design theme.

Designed specifically for panel mounting in furniture, PIP fits into a standard 60mm cable grommet opening and requires only 44mm depth. Integrated fixings enable quick installation in most surfaces from 0.9mm to 30mm thick, including panels with limited rear access.

PIP is supplied as a prewired unit with hardwired power cable to national mains plug or GST18 connector, ready for installation. Two or more PIP units can be interlinked to provide combinations of AC power and USB fast charging as is needed by the user.

Configuration:

The PIP single socket aperture may be configured with an AC power from the OE 42mm modular range or our class leading OE TUFA+C25W:Twin USB Fast charger

 

Construction:

Body and back – Nylon Socket fascia – Polycarbonate Bezel – ABS with optional metal inlay

Integral Fixings:

Panel mount clips for surfaces 0.9mm – 3mm thick Screw clamps for surfaces 0.9mm – 30mm thick

Colours

Socket fascias – Black, Grey or White (UK AC & TUF only) Body and back mouldings – Black Bezel – Black, grey or white mouldings with optional satin painted finishes and decorative inlays

Earth Bonding:

PIP units with AC power sockets can be ordered with an optional external lead for earth bonding metal furniture.

Socket Fusing:

To enable compliance to BS6396 UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A)

Power cord options:

PIP may be ordered: Hardwired power cord to AC plug, or Hardwired power cord to GST18-3, or Hardwired power cord to OE J coupler

Installation:

PIP can be installed into a pre-existing industry standard ø60mm cutout, or hole can be drilled into surfaces using an appropriate hole saw.

Quality and Testing:

All PIP units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance

“We test every pin on every connection in every socket”

CE Marking

All units built with UK and European socket types are CE marked by OE Electrics as complying with: Electromagnetic Compatibility Directive 2014/30/EU Low Voltage Equipment Directive 2014/35/EU RoHS2 Directive 2011/65/EU

Certifications

PIP has been designed and is manufactured to comply with applicable national/international safety and EMC standards for the country of intended use, utilising fully certified components.

Dimensions:

Cutout Dimensions:

PIP can be installed into a pre-existing industry standard Ø60mm cutout, or hole can be drilled into surfaces using an appropriate hole saw.

Maximum Panel Thickness:

Cutout Dimensions:

PIP can be installed into a pre-existing industry standard Ø60mm cutout, or hole can be drilled into surfaces using an appropriate hole saw.

Maximum Panel Thickness:

Fitting Instructions

For Panels 1 – 3mm thick (for rear or side exit)

Fit PIP into cutout

Press firmly on PIP until you hear a click!

For Panels 1 – 15mm thick (for rear or side exit)

Place PIP into cutout at an angle as shown

Turn screw clamp up to required depth

Place bezel onto PIP

Turn bezel until click

For Panels 15 – 30mm thick (for rear exit only)

Place PIP into cutout

Turn screw clamp up to required depth

Place bezel onto PIP

Turn bezel until click

Pip Datasheet

3D file

CE Declaration

Hi-Resolution Images

Fitting Instructions

PIP is supplied as standard in white with a grey socket, but is available in a number of special paint finishes. Almost any colour can be applied* and then finished as standard satin, gloss, or ‘soft touch’. Download the OE Colour Book here  

  • Pip Stainless Steel Inlay TUF A+C USB charger

    Stainless Steel Inlay

  • Pip in light wood with white bezel and black UK fused socket

    White

  • Pip in light wood with yellow bezel and black UK fused socket

    Yellow

  • Pip in light wood with light orange bezel and black UK fused socket

    Light Orange

  • Pip in light wood with orange bezel and black UK fused socket

    Orange

  • Pip in light wood with red bezel and black UK fused socket

    Red

  • Pip in light wood with pink bezel and black UK fused socket

    Pink

  • Pip in light wood with dark blue bezel and black UK fused socket

    Dark Blue

  • Pip in light wood with light blue bezel and black UK fused socket

    Light Blue

  • Pip in light wood with green bezel and black UK fused socket

    Green

  • Black Pip with UK fused socket, black bezel in light wood

    Black

*Please note colours may vary on monitors

  

tuf tuf a+c 

Pin It on Pinterest

Share This
`