Minimum depth requirement 64mm
Optional TUF A+C 25W
Ultra compact in-surface unit
BS6396 compliant and CE marked*
An ultra-compact in-surface power, data and AV unit with press and full soft-eject mechanism.
OE Electrics’ design brief for their new longitudinal in-surface module was for: the most compact; simplest to install; internationally compatible and technically capable; auto-opening power and data module on the market, whilst maintaining a sleek design aesthetic and robust high quality feel.
Standard colours – Silver anodised body – grey fascias and end caps.
Other colours available on request – may be subject to minimum order quantity.
PIVOT apertures may be configured with the following AC power options from the OE 42mm modular range or our class leading OE TUFA+C25W:Twin USB Fast charger.
Power: UK, European and International power sockets and/or OE TUFA+C25W:Twin USB Fast charger Data : Cat5e, Cat6, Cat6a or Cat7 data connection options, with colour coded port identification. USB: USB2.0 or USB 3.0 type A for PC connection. For USB charging specify the OE TUFA+C25W:Twin USB Fast charger AV: VGA, HDMI, DVI-D and Display Port AV connection options.
Earthed aluminium extruded chassis Fire retardant moulded socket and data/AV fascias, and end caps OE anti-flex system of interlocking socket fascias guarantees unit integrity regardless of length Internal 2000V protective insulating membrane Internal segregation between Power and Data/AV components
Main body & frame – Natural anodised aluminium Endcaps – Grey Socket fascia – black or grey Cable – black
To enable compliance to BS6396 UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A).
Earth bonding slots along length of the unit allow the attachment of earth bonding lead with standard 3mm ring terminal.
Power cord options:
PIVOT may be hardwired to: – mains AC plug, – Male Wieland GST18 connector for “soft wiring” e.g. connection to an under desk power modules or direct to a wall/floor socket via a starter cable.
PIVOT may be installed into desktops, panels or soft furnishing surfaces up to 45mm thick (rear access is required for surfaces less than 13mm thick). Integrated mounting clamps avoid the need for fixing screws.
Quality and Testing:
All PIVOT units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch:
- Visual: Configuration and appearance.
- Power sockets: Continuity, polarity, insulation & earth
- USB charger: Output voltage and resistance
- All sockets continuity tested with batch performance testing
“We test every pin on every connection in every socket”
All units built with UK and European socket types are CE marked by OE Electrics as complying with:
- Electromagnetic Compatibility Directive 2014/30/EU
- Low Voltage Equipment Directive 2014/35/EU
- RoHS2 Directive 2011/65/EU
AC power socket: The fitted sockets will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, CCC, AS/NZS3112. OE TUF5A: Independently certified to IEC60950-1/UL60950-1. Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.
Added installation features
Full face side installation – the clamping system operating from the front face, for surface thicknesses of 13 – 45mm (for less than 13mm surface thickness – rear access would be required)
Ultra slim 80mm cutout – with full flange to mask cutting inaccuracy, but also allows PIVOT to be considered for installation in soft furnishings.
Pivot can be fitted either recessed in the surface or resting on the top. Please follow the fitting instructions carefully. All Pivot units come with instructions included.
NOTE: Screws should be tightened only to the point when the clamp touches the underside of the desk.