Pulse-8

TUF-inside-USB-charger-Type-A-Type-C

Choice of 8 colours
Optional TUFA+C 25W
International power socket options
CE marked as applicable

Add a splash of colour to your world with the PULSE-8 range from OE Electrics.  Based on our top selling PULSE unit, PULSE-8 is now available to order in a choice of 8 lively colours with a choice of black or grey sockets.

PULSE-8 can be specified with a wide range of OE Electrics modular power data and AV sockets including our class-leading OE TUFA+C25W:Twin USB Fast charger. In addition, multiple bracket options allow PULSE-8 to be fitted to desktops, screens, tool/equipment rails and many other locations

All OE Electrics products are manufactured to enable compliance with BS6396 or BS7671 where relevant.

Configuration:

PULSE-8 may be configured with the following AC power options from the OE 42mm modular range or our class leading OE TUFA+C25W:Twin USB Fast charger

Power: UK, European and International power socket options, and/or OE TUFA+C25W:Twin USB Fast charger

Data:     Cat5e, Cat6, Cat6a or Cat7 data connection options, with colour coded port identification.

USB:      USB2.0 or USB 3.0 type A for PC connection. For USB charging specify the OE TUFA+C25W:Twin USB Fast charger

AV:         VGA,  HDMI, DVI-D  and Display Port AV connection options. Pull-through cable option.

Construction:

PULSE-8 is moulded in fire retardant ABS and then painted in abrasion resistant “two pack” acrylic.
Internal segregation is provided between Power and Data/AV components.

Colours:

Main body – dark blue, light blue, orange, light orange, yellow, red, pink or light green
Socket frame – black or grey
Socket fascia – black or grey (Nema 5-15R – black only)
Cable – white (not 14AWG) or black

Socket Fusing:

To facilitate compliance with BS6396  UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A)

Earth Bonding:

UK versions are supplied with a 250mm earth lead with 5mm  ring terminal.

Power cord options:

PULSE-8 may be  hardwired to:
– mains AC plug,
– Male Wieland GST18 connector for “soft wiring” e.g. connection to an under-desk power modules or direct to a floor socket via a starter cable.

Installation:

PULSE-8  is supplied as standard with a black or grey powder coated steel desk edge bracket with screw clamps for 5-35mm desktops and slot for attaching a laptop security cable.  Other alternative fixing options include an “extended” clamp bracket for desktops up to  55mm thick, plus tool/equipment rail brackets.

Quality and Testing:

All PULSE-8 units are manufactured using ISO9001 quality controlled components and practices and are  100{c5b1f241da6e5b4bee8d0932fb0643990814bf9b614754cadfed0551f0b5cb5d} tested before dispatch:

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance
  • Data & AV: Continuity (optional data performance certification)

“We test every pin on every connection in every socket”

CE Marking:

All units built with UK and European socket types are CE marked by OE Electrics as complying with:

  • Electromagnetic Compatibility Directive 2014/30/EU
  • Low Voltage Equipment Directive 2014/35/EU
  • RoHS2 Directive 2011/65/EU

Certifications:

AC power socket: The fitted sockets will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, CCC, AS/NZS3112.
OE TUF5A: Independently certified to IEC60950-1/UL60950-1.
Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.

Dimensions:

Standard Fixings

PTR – Screen Fixing

Standard tool-rail fixing (Please call for confirmation)

HTC – HT Beam Fixing

Suitable for fixing to a HT Beam

PCB – Clamp Bracket

Clamps are available for desk thicknesses between 15mm and 35mm (Call for other desk thicknesses)


Angled data fascias allow data cabling to pass straight through PULSE-8, ensuring the integrity of cables which have a minimum bend radii (Cat5e, Cat6 etc).

PCB Clamp Bracket 15 – 35mm
PEC Clamp Bracket (Extended) 38-55mm+
PLC Clamp Bracket (Long-Reach) 15-35mm+
PTR Tool rail fixing*
HTC HT Beam fixing
*Please call to confirm screen/toolrail compatibility
+Available on application

Custom brackets can be designed on application, please contact sales

🔍 Click image to zoom & choose download options

Pulse comes in white with grey or black sockets as standard, but is available in a number of special paint finishes. Almost any colour can be applied* and then finished as standard satin, gloss, or ‘soft touch’.
Download the OE Colour Book here

*Please note colours may vary on monitors