Quick & easy to install
Flush mounted in-desk box
Opening edge has a soft bristle insert that fits snugly around cables allowing lids to sit tight and flush
TUF A+C 25W option
Our elegant, versatile and durable Tardis in surface power and data box is an ideal solution for meeting tables, where easy access to multiple sockets is required from all sides.
Tardis comprises twin natural anodised aluminium extruded hinged lids with a central brush strip cable channel. Innovative cable guides attached to each lid, guide power and data cables into the brush strip channel as the lids are closed thereby preventing trapped cables.
The Tardis powder coated steel under desk caddy can be specified with a wide range of power and data/AV options including our class leading OE TUFA+C25W:Twin USB Fast charger.
Alternatively Tardis can be supplied without a caddy for use as an access port to an under desk cable tray.
Tardis has been designed for flush fitting in desk and table tops and is therefore ideally installed in factory routed rebated cut outs.
All OE Electrics’ products are manufactured to enable compliance with BS6396
TARDIS apertures may be configured with the following AC power options from the OE modular range, our class leading OE TUFA+C25W:Twin USB Fast charger and one or more Cat5e, Cat6, Cat6A data, USB, HDMI, VGA and sound connections.
Power: UK, European and International power sockets and/or OE TUFA+C25W:Twin USB Fast charger Data : Cat5e, Cat6, Cat6a or Cat7 data connection options, with colour coded port identification. USB: USB2.0 or USB 3.0 type A for PC connection. For USB charging specify the OE TUFA+C25W:Twin USB Fast charger AV: VGA, HDMI, DVI-D and Display Port AV connection options.
TARDIS comprises aluminium extruded sections for the lid and side frames fitted between high strength polycarbonate end plates. The moulded ABS 3 or 4 gang power module and ancillary data connections are mounted into a powder coated 1.2mm mild steel fabricated undercarriage. All metal parts are earthed via the power supply earth connection.
Undercarriage – powder coated grey Lid/frame – natural anodised aluminium Brushstrip – black Endcaps – black Door latch – blue PU Socket frame – black PU Socket fascia – black Cable/wieland – black
To enable compliance to BS6396 UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A)
Earth stud on the underside of the fabrication allow the attachment of earth bonding lead with standard 5mm ring terminal. (can be ordered separately)
Power cord options:
TARDIS may be hardwired to: – mains AC plug, – Male Wieland GST18 connector for “soft wiring” e.g. connection to an under desk power modules or direct to a floor socket via a starter cable.
Quality and Testing:
All TARDIS units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch:
- Visual: Configuration and appearance.
- Power sockets: Continuity, polarity, insulation & earth
- USB charger: Output voltage and resistance
- All sockets continuity tested with batch performance testing
“We test every pin on every connection in every socket”
All units built with UK and European socket types are CE marked by OE Electrics as complying with:
- Electromagnetic Compatibility Directive 2014/30/EU
- Low Voltage Equipment Directive 2014/35/EU
- RoHS2 Directive 2011/65/EU
AC power socket: The fitted sockets will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, CCC, AS/NZS3112. OE TUF5A: Independently certified to IEC60950-1/UL60950-1. Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.
For fitting the Tardis into the desk or table top please follow the cutout instructions below.
These cutout details are provided as a reference for information purposes only. Before cutting any holes check dimensions of actual box samples to ensure accurate fit.