QikFit Steel Panel Frame
Fits vertical panels from 10mm to 40mm thick
Multiple units can be installed in one piece of furniture
Stainless Steel Frame
The Qikfit STEEL PANEL FRAME (SPF) allows the same flexibility in configurations as the THICK PANEL FRAME but with the elegance of brushed stainless steel.
Designed to fit in vertical panels 10mm – 40mm thick, the SPF screws into the inside edge of the cutout, with all fixings disguised once installed.
Several SPF units can be powered via a simple outlet, by linking them together with plug and play interconnecting leads. This means multiple units to be installed into one piece of furniture with just one mains connection.
Configurations
The QF45 Steel Panel Frame can be fitted with the following QikFit module combinations:
• 1 x QikFit 2G power module plus 4 x QF5 data/AV modules
• 2 x QikFit 2G power modules
• 1 x QikFit 2G power module, 1 x QikFit TUF module plus 1 x QF5 data/AV module
• 9 x QF5 data/AV modules
*Locking clips must be removed before assembly
Construction
Stainless Steel
Mounting
Six screw slots allow up to six fixing screws (not supplied) to be used to attach to panels 10mm – 40mm+ thick.
Dimensions
Cutout Dimensions

Fitting