pablo

Configuration:

Top mounted 25W TUF A+C USB charger with USB PD or TUF HP with an under-desk PSU.

Construction:

Moulded polycarbonate body
Endcap fitted with either a silver anodised or gloss black steel inlay and spring operated shutter

Colours

PABLO is available in black or signal white with either silver anodised or gloss black inlay and shutter.
Decorative ring – blue with optional LED (TUF A+C 25W only)

Installation:

PABLO fits into a standard 80mm grommet hole and is securely held in place by the large plastic locking nut which can be tightened by hand.

Quality and Testing:

All PABLO units are manufactured using ISO 9001 quality controlled components and practices and are 100% tested before dispatch:

Visual: Configuration and appearance
USB charger: Output voltage and resistance
Mechanical: correct operation of shutter mechanism

“We test every pin on every connection in every socket”

CE Marking:

All PABLO units are CE marked by OE Electrics as complying with:

• Electromagnetic Compatibility Directive 2014/30/EU
• Low Voltage Equipment Directive 2014/35/EU
• ROHS3 Directive 2015/863

Certifications:

Safety – IEC61558-2-16 EMC – EN62104-3:2000, FCC Part (B) Class B
Cable, connectors & mains plug: Independently certified to the appropriate national/international standard
EU

TUF 25W USB Charger:

Specifications
USB Charging Outlets	1x Type A Female (Reversible) 1x Type C Female (Reversible)
Charging Current	Type C 5V/3A, 9V/2.22A, 15V/1.65A, 20V/1.2A (PD3.0) Type A: 5V/3A, 9V/2A, 12V/1.5A (QC3.0/QC2.0) Combined (A+C) : 5V/4.0A (MAX)
Total Output Power	25W
AC Voltage Range	100-240VAC at 50/60Hz
AC Input Current (Full Load)	Maximum 0.6A
Efficiency	Up to 90%
Environment	0-25°C
Standby Power	0.05W
Features:
Internal Over Temp Protection	Yes, Self Resetting, Blue & Green LED flash
Internal Over Voltage Protection	Self Resetting
Output Over Current Protection	Self Limiting Type C – Flash Green Type A – Flash Blue
Short Circuit Protection	Self Resetting
USB Sockets	Gold plated for improved contact. Type A and Type C manufactured for minimum 10.000 insertions.
Power indicator	Blue LED Standard Voltage Green LED Higher Voltage (PD/QC)
Charge Standards	(IDR) – Intelligent Device Recognition, PD3.0; QC2/QC3
Standards	Certified to IEC 62368-1 : 2014 (safety) and EN61204 : 2000 (EMC)

TUF HP USB Specifications:

USB Charging Outlets	1x Type A Female (Reversible) 1x Type C Female (Reversible)
Charging Current	Type C : Max 60W 20V/3A, 15V/3A, 9V/3A, 5V/3A (PD3.0) 3.3 – 11.0V / 3.2A (PD PPS Mode) QC 2/3.0 5V/3A, 9V/2A, 12V/1.5A Type A : Max 12W 5V / 2.4A IDRBC1.2, Apple 12W Mode Samsung Fast Charge
Total Output Power	70W Max
Input Voltage	24-30V DC
Environment	0-25°C
Over Current Protection	Yes. Digital control at 3.3A. Auto reset with LED flash.
Short Circuit Protection	Yes. Digital control at 3.3A. Auto reset.
Over Temperature Protection	Auto power reduction to PD 45W mode. 20V/2.25A, 15V/3A, 9V/3A, 5V/3A
Field Replaceable	Yes, when in 42mm canister & QF5 solution.

QF30 PSU Specifications:

Input Connectors	1x Male mains GST18/3 input 20A installation coupler
Output Connectors	1x Female mains GST18/3 output 20A installation coupler 1x Female 30V DC GST08 output
Input Voltage	100-230 VAC 50-60Hz 100-110VDC
Rated Current Input	1.7A
AC through current rating	20A
Output Power	70W MAX
Output Voltage	30V DC
Output Current Rated	2.34A
Standby Power	0.21W
Efficiency	92% MAX
Over Current Protection	Yes
Short Circuit Protection	Yes
Over Temperature Protection	Yes
Status Indication	Yes Blue LED – power on
Certifications	UL/IEC 62368-1 : 2018 (safety) EN61204 : 2018 (EMC) EN 50121-3-2 (railway) FCC part 15 (B)

The QF30 PSU must be paired with the TUF-R HP and GST08 lead.

Dimensions

 

PABLO fits into a standard 80mm grommet hole and is securely held in place by the large plastic locking nut which can be tightened by hand.

Cut out dimension

Pablo Datasheet

Pablo TUF/HP Datasheet

PabloARC retrofit instructions