Minimalist low profile design in black or white
TUF HP high power USB charging option
Simple installation into 80mm* grommet apertures
Wide range of Data & AV options
QIKFIT PORT from OE has been designed to provide a discrete, flexible and low cost installation solution for our QIKFIT TUF HP USB charging and data/AV modules.
Designed to install in an industry standard 80mm diameter aperture in a wide range of furniture, QIKFIT PORT can be supplied preconfigured with your choice of QF05 modules or as part of a component kit for onsite configuration.
When fitted with one or two of our new QF05 TUF-R HP USB charging module and installed in combination with a concealed QF30 Power Supply or QIKPAC battery, PORT will provide high power USB charging with unrivalled user convenience and safety.
*Capable of fitting into Ø76 – 80mm (3.00-3.15”)
PORT can be fitted with the following QF05 modules :
• Blank fascia
• HDMI keystone coupler
• 3.5mm stereo keystone coupler
• Cat5e/Cat6 data
• VGA 300mm M-F
• USB type C keystone ext cable
• USB 3.0 Type A keystone ext cable
• Pull through fascia (please enquire)
*Note: QF05 TUF-HP will require connection to a QIKFIT Power Supply or QIKPAC battery via a GST08 power lead.
High strength fire retardant polycarbonate
Black or white (RAL9003)
QF PORT fits into a Ø80mm* grommet hole and is securely held in place by 2 screws.
QF05 modules snap fit into port using their integrated retaining clips
Quality and Testing:
QIKFIT PORT is UK manufactured using ISO9001 quality controlled components and practices and if ordered preconfigured is 100% tested before dispatch:
• Visual: Configuration and appearance.
• USB charger: Output voltage and resistance
• Data & AV: All sockets continuity tested with batch performance testing.
“We test every pin in every socket in every module”
The optional QF05 TUF HP USB charging module, QIKFIT power supply and QIKPAC battery have extensive international safety, EMC and ROHS certification. See the model specific data sheets for full information.
QF05 TUF HP USB datasheet download here
QIKFIT30 PSU (power supply) datasheet download here
QIKPAC battery datasheet download here
1. Place QF PORT into 80mm* (3.15”) grommet hole
2. Secure in place using screws supplied*
*Ensure screws are suitable for the surface being mounted to, OE accept no responsibility for damaged surfaces if the provided screws are not suitable
3. Clip chosen QF05 fascias* into place
*Compatible QF05 fascias can be viewed on the PORT Technical tab.