Phase

TUF-inside-USB-charger-Type-A-Type-C

Stylish, compact and robust design
On or Under fitting solutions
Hidden fitting bracket
Optional TUF A+C 25W
Available in black or white
International power options

PHASE is an exciting new concept in power modules from OE Electrics, that is ideal for providing convenient but discreet power, data and USB Fast charging  in offices, hotels, restaurants, airports and many other locations.

Compact, robust and unconstrained by convention, you will find PHASE with its innovative concealed mounting bracket and through back or through base cable entry options, simple to securely install on desks, tables and soft furnishings.

PHASE is available in either white or black with your choice of grey or black socket fascias. The two socket apertures can be configured with a combination of power and data sockets from the extensive OE 42mm modular range.

Configuration:

The PHASE double socket apertures may be configured with the following AC power options from the OE 42mm modular range or our class leading OE TUFA+C25W:Twin USB Fast charger. PHASE can also be configured with data and/or AV sockets. Through back or through base power and data cable entry options.

Construction:

High-strength and flame retardant polycarbonate main body and back mouldings
Nylon slide-on/clip-on universal mounting bracket
Snap-in OE “42mm” modular power socket /TUF polycarbonate fascias
Custom metal fixings available, e.g. to attach to steel sections in soft furnishing.

Colours

Body – black or white
Power socket fascia – black or grey
TUF fascia – black or grey
Data/AV fascia – black or grey
Power cable – white (not 14AWG) or black

Socket Fusing:

To enable compliance to BS6396 UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A)

Power cord options:

PHASE may be hardwired to:
– mains AC plug,
– male Wieland GST connector
for “soft wiring” e.g. connection to under-desk power modules or direct to a floor socket via a starter cable

Quality and Testing:

All PHASE units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch

  • Visual: Configuration and appearance
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance
  • Data & AV: All sockets continually tested with batch performance testing

“We test every pin on every connection in every socket”

CE Marking

All units built with UK and European socket types are CE marked by OE Electrics as complying with:
– Electromagnetic Compatibility Directive 2014/30/EU
– Low Voltage Equipment Directive 2014/35/EU
– RoHS2 Directive 2011/65/EU

Certifications

AC power socket: The fitted sockets will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, CCC, AS/NZS3112.
OE TUF5A: Independently certified to IEC60950-1/UL60950-1.
Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.

Dimensions

phase-power-socket-plugusb-charging-dims

Rear Cable Exit Fitting

PHASE has been designed in such a way as to make fitting very easy. Simply screw the mounting bracket to the surface you intend to mount PHASE and slide PHASE into place.phase-installation-socket-usb-fast-charging

PHASE can also be clipped into place if the cable is exiting via the base. In this case the universal Mounting Bracket should be screwed into place as shown ensuring that screw ‘A’ is not fully tightened. PHASE is then clipped into place as shown.

PHASE can be removed by disengaging the retaining clips, and following the steps for either installation method in reverse.

phase-retaining-clip-detail

Simply push retaining clips towards fixed surface then slide PHASE off bracket

Bracket Dimensions:

phase-bracket-dimensions

For mounting onto soft furnishings, bespoke metal brackets can be provided which are bolted to the standard nylon bracket, which then attaches to the Phase body.

Beam Fixing

PHASE beam bracket is available in white and is suitable for beam fixings between 5 – 30mm

For mounting onto soft furnishings, bespoke metal brackets can be provided which are bolted to the standard nylon bracket, which then attaches to the Phase body.

Base Cable Exit Fitting

🔍 Click image to zoom & choose download options