Genie

TUF-inside-USB-charger-Type-A-Type-C

Ability to be fitted by ONE person
Unique lock arm system
TUF A+C 25W option
BS6396 compliant and CE marked*

The GENIE in-desk box provides an excellent solution for power and data communication requirements built directly into the work station.

The flush mounted, one size GENIE in desk box has been designed to accommodate up to but not exclusively 4 power sockets/OE TUFA+C25W:Twin USB Fast charger, 4 data outlets plus VGA and Audio (see our modular components)

The GENIE is designed with the ability to be fitted from the top of the desk or table by one person, negating the need to work under the desk.

The unique locking arm system ensures that the GENIE is securely fitted to the table desk top by operating screws at each end of the GENIE. Each GENIE has a special recessed channel to the inside rim to funnel any minor spillages away from the current carrying parts.

The polycarbonate lid has two scalloped recesses, one at each end, to allow easy and free access for power and data cables.

All OE Electrics’ products are manufactured to enable compliance with BS6396

*as applicable

 

Configuration:

GENIE’s 4 socket apertures may be configured with the following AC power options from the OE modular range, our class leading OE TUFA+C25W:Twin USB Fast charger and up to four Cat5e, Cat6, Cat6A data, USB, HDMI, PLUS VGA and stereo connections.

*Keystone sockets in dataplate

Construction:

GENIE comprises of a white polycarbonate box with lid housing a moulded ABS 3 or 4 gang a black power module and ancillary data connections are mounted into a polycarbonate dataplate.

Colours

Polycarbonate box and lid – white
PU Socket frame – black
PU Socket fascia – black
Keystone data sockets – white
Cable – black

Socket Fusing:

To enable compliance to BS6396  UK sockets are fitted with 5 x 20mm anti-surge ceramic fuses, with colour-coded fuse clips to denote the rating (3.15A/5A).

Power cord options:

GENIE may be hardwired to:
– mains AC plug,
– Male Wieland GST18 connector for “soft wiring” e.g. connection to an under desk power modules or direct to a floor socket via a starter cable.

Installation:

GENIE can be fitted into table tops 18-32mm thick.

Quality and Testing:

All GENIE units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch:

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance
  • All sockets continuity tested with batch performance testing

“We test every pin on every connection in every socket”

CE Marking

All units built with UK and European socket types are CE marked by OE Electrics as complying with:

  • Electromagnetic Compatibility Directive 2014/30/EU
  • Low Voltage Equipment Directive 2014/35/EU
  • RoHS2 Directive 2011/65/EU

Certifications

AC power socket: The fitted sockets will be certified to the appropriate national/international standard eg: BS1363/5733, IEC60884-1, CCC, AS/NZS3112.
OE TUF5A: Independently certified to IEC60950-1/UL60950-1.
Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.

Dimensions

Features:

 

 

Cutout Dimensions

When installing the GENIE into a desk, make sure cut out is a neat fit. If cut out is too large, the in desk box will move. Packing between cut out sides may be required to provide a neat fit. A neat fit is recommended for correct operation of the GENIE.

A special adjuster is available on request which will allow the GENIE to be mounted in material as thin as 1mm. Although the GENIE is better flush mounted, it can also be surfaced mounted. Always measure the in desk box before commencing with cut out.

    Genie datasheet 3D file CE Declaration (Powerunit) Fitting Instructions

🔍 Click image to zoom & choose download options